DIY, Home Maintenance & Repair
Mar 06, 2019 10:32 am
I’m doing a full renovation of an old house, and have had the old walls and flooring taken off in the two rooms which are on a concrete slab.
It appears as though the old concrete was done as one big lot of footings and separate slab poured in after.. this was done sometime in the 50’s I believe, and as you can imagine, the footings are now not straight, and the interior slab has come away from the footings and is not level at all, in one corner, the slab is sticking above the footing, and the rest of it is sitting below the footings. In some parts, the base of the old frame has gaps between it and the footings.. I have filled the gap between the footings and slab, and I have floor leveller ready to go..
My question is whether I level the floor before or after the plasterer comes to hang the walls ??
Sign in or Join to reply to this Topic
IamSAMLevelling driveway to build carportLevelling driveway to build carport
unlikely that carport company will do the levelling. i recommend you finalise carport first, take specifications from them about "how they want the levelling" and then…
JoshAURemove bedrock & concreting vs levelling bedrock & sealing?Remove bedrock & concreting vs levelling bedrock & sealing?
Hi all. I'm digging/jack hammering out bedrock in a workroom I'm expanding under my house. The previous owner had leveled and concreted about half of the open area,…
Andre2018changing platform floor to cut in floorchanging platform floor to cut in floor
I have a very old (1897) Jarrah framed house in WA and I want to do some remedial work on the isolated brick piers which necessitates me removing the floor. The floor…