Sep 15, 2018 8:13 pm
Re: Help removing tap nozzle / aerator4
Nov 29, 2018 9:10 pm
Going on the picture it looks as if it is a female aerator and may screw off under the groove section in the photo. I usually use a thin bit of rubber like an outlet washers for more grip. Try with your hands but you may need to use a pair of multigrips over the rubber being very careful not to sctratch the chrome off.
It could also be a style that needs a plastic key like tool to unscrew from the bottom. Try speaking to the plumbing supplies like Reece or Tradlink. They may have a spare one they can give you.
Sign in or Join to reply to this Topic
russellcookRemoving this StructureRemoving this Structure
Hi everyone, Thanks for the replies. I'll look into moving it to the classified section. However, the timber is quite old with large splits so not sure if anyone would…
Neil DeeRemoving paint from garage floorRemoving paint from garage floor
Hi Guys Garage floor (car is housed in garage) was originally sealed then painted over, now it's coming off, have tried to gernie and repaint with no luck.....can you put…