Why make so much work for yourself? Use a marine lacquer or something like Sikkens - It will last a few years before needing another coat
Browse Forums DIY, Home Maintenance & Repair Re: Maintenance of timber windows and front door 22Aug 15, 2008 9:43 pm Dukekamaya elly Seeing as we already have them though i'll just sand and oil them with decking oil, every 3 or so months i imagine Why make so much work for yourself? Use a marine lacquer or something like Sikkens - It will last a few years before needing another coat A few years Luke? That's good to hear. How can you tell if they need sanding or not? Building Standards; Getting It Right! AS2047 Section 6 Page 31 speaks to Construction/Tolerances of Windows and external glazed doors in buildings Check also New South Wales Guide to Standards and Tolerances,… 12 20393 Depends... Brick veneer required the window to be attached to the house frame, this is usually achieved by screwing through the timber reveal into the frame. There are… 1 4622 Engineering timber is certainly a less fuss option, times cheaper to supply and install and better withstands humidity. 1 11524 |