Browse Forums DIY, Home Maintenance & Repair 1 Jan 12, 2015 8:58 am Hi, I need some advice as to what tool I should use to make my life a little easier! We are getting outdoor tiles installed over a concrete pathway that runs around the side of our house. There is a timber gate on this side so the bottom will need to be trimmed to accommodate the height of the tiles. What is the best hand held power tool to use to trim roughly 20mm in a straight line from the bottom of the gate? Re: Tool for cutting bottom of timber gate? 2Jan 12, 2015 10:10 am Take the gate down, lay it down flat on say some milk crates, mark a cut line, get a circular saw and cut that 20mm off the bottom. Owner Building at Jimboomba Woods in Logan City Qld. Blog : http://bandlnewhomebuild.blogspot.com H1 thread : viewtopic.php?f=38&t=68283 . I should have followed up on this thread. So, the pier foundation wasn't large enough on the side it was leaning towards, and the NBN cable went through the pier, just… 8 12133 Get some long brass machine screws and bolt right through the gate and put brass acorn nuts and washers on the other side. It will never come off 1 9084 Hi everyone! This is my first time posting here, and I'm looking for some advice regarding my house construction project in North Kellyville. I… 0 6701 |