DIY, Home Maintenance & Repair
May 09, 2014 5:07 pm
My manual roller shutters on the windows at my house don't work. I opened up the headbox and it turned out the pulley is broken. I got a couple of quotes that it will cost about $100 to have it replaced. I hope to fix it up on my own at this stage. I hope to get some advice on hot to do it.
Sorry, I tried unsuccessfully to upload some pictures.
Thanks with anticipation,
Re: how to replace the damaged pulley in manual roller shutt2
Nov 07, 2017 8:43 pm
Check out you tube to find some videos. There are normally loads of how to videos. If you are pretty good at following instructions over the phone get in contact with www.anthonyschlotzer.com. He has a bit to do with roller shutters and will have an installer which will be able to talk you through it.
He has a blog and is in SA. Check out this post https://www.anthonyschlotzer.com/single ... -Questions. This won't answer your question but you should be able to get in touch.
Hope this helps
Sign in or Join to reply to this Topic
sparky_JsPRF lightswitch retaining manual functionalityRF lightswitch retaining manual functionality
As "Pepsi_Drinker" said, Fibaro Z wave is the way to go as you can control the lights from an app and the relay sits in behind the switch still allowing you to operate the…
ApolloBigTreelawn overgrowing: manual weeding or a better solution?lawn overgrowing: manual weeding or a better solution?
Hi, please see the attached picture of my garden bed (lawn on the right side, garden bed above the rocks) This is not my house just a rental so I can't go through major…