Browse Forums DIY, Home Maintenance & Repair Re: stud wall without the top plate? 5Jun 01, 2014 5:11 pm i would use a top plate,run screws through the wall into the toplate with waterproof grommits and then run a plate around the top of all walls to lock it all together.this will help hold the pop rivot me together shed from falling apart. if you dont tie it all together one wall will have to much load.these sheds really are not designed for this.so brace,brace,brace http://www.bestcordlesstoolsreviews.comall reviews by qualified tradesman This certainly doesn't look good. I would be engaging with an independent inspector to have a look at this. As for the unscheduled site visits, most builders are quite… 1 28327 Elvis has left the building... The site supervisor quit after 2 month on the project. I guess he was just instructed to bark at people, but didn't like when he was… 26 20936 Hi, I contracted a Builder to do a Garage to Bedroom + ensuite conversion (Class 1a), the Builder engaged the Certifier and Engineer and received BDA from the Certifier… 0 5034 |