Browse Forums DIY, Home Maintenance & Repair 1 Oct 19, 2013 11:37 pm Hi, I have an old Oasis gardener 6 sprinkler controller which comes on when set in auto but zone 1 will not switch over to zone 2. It seems to just stay on. I can stop it easily enough on the controller and in manual mode I can step through all the zones just fine. Only happens in automatic, and actually in test mode now that I think of it, the same thing happens, zones 1 just keeps going. Seems like the duration dials don't work on the controller or something. I know it's a relic and a bit of an ask but if there are any suggestions which might save me the expense of a new controller, I'd be very grateful. Thanks B Hi , I'm currently going through this now within the Whitehorse council which has a similar set of restrictions. We're having to make compromises with our floor plan due… 3 30668 Yes it had a house on it. But Melbourne water only wanted something the original size of the existing house. We managed to fit a 45sq house on. 10 33655 |