Browse Forums DIY, Home Maintenance & Repair Re: How to hang or stick foam board on the wall? 2Sep 09, 2012 9:26 am The Harder You Try - the Luckier You Get ! Web site http://www.anewhouse.com.au Informative, Amusing, and Opinionated Blog - Over 600 posts on all aspects of building a new house. Re: How to hang or stick foam board on the wall? 4Sep 09, 2012 10:49 am Velcro dots bing about the size of a 1$ coin are easier to remove than a line of double sided tape. You would probably only need 4. Some double sided tape is one layer of plastic with adehesive each side. For a little more you can get a tape which is a thin layer of foam in the middle. Can't remember the brands but you can buy both at the big green DIY shop The Harder You Try - the Luckier You Get ! Web site http://www.anewhouse.com.au Informative, Amusing, and Opinionated Blog - Over 600 posts on all aspects of building a new house. DIY, Home Maintenance & Repair Ditto 3M Claw, expensive but best thing I've used to date. I put two of the 11kg ones in for a 12kg mirror on the wall, and its been great for 4 years now. 4 2164 Thanks Simon, I guess I'm no concerned with the volume of the noise rather that dead and hollow sound and feel that is associated with floating floors. But I'm not sure… 3 6248 Oh no! I would use a can of expandable foam ( there are some that will take render) then cut it back and render over the top 1 4257 |