Browse Forums DIY, Home Maintenance & Repair Re: Powerboards and 10amp power outlets - safety recommendat 8Jun 03, 2010 11:54 pm borg Hi AJW i know what your trying to say. But perhaps its not totally clear. Firstly Camalia my comments above was talking about it in the context of a 10am power board (multiboard), and not a GPO. AJW what is being said is that one GPO with two sockets can have a total amp current of up to 16amps. So you can have perhaps 10amp on one and 6amp on another. Your right it wasn't 100% clear what I was getting at, couldn't think at the time of a better way. But your right with your comment, the OP was talking about a powerboard to start with, then changed to talking about a GPO. Hence why I tried to point out that there is a slight difference between what they are capable of. Hi everyone. I am a single mother with little daughter, living in a small tourist town in WA Australia. I am thinking to install security screens to all the doors and… 0 25164 Would also like an opinion from anyone that has used xcem over hebel for floors. Thanks 1 14247 2 15471 |