Browse Forums DIY, Home Maintenance & Repair 1 Jan 17, 2010 5:19 pm Hi everyone, My parents' house has a section of a wall where the mortar colour does not match the rest of the house. Its a subtle difference, but never-the-less, noticeable when pointed out. Someone suggested mortar staining/tinting and said some companies even offer up to 25 yrs gurauntee. Is there a difference between staining and tinting? Forgetting cost for a minute, is this a good solution or could it potentially cause weird discolouration that would make it worse and more noticeable than it currently is? Re: Mortar staining/tinting 2Jan 21, 2010 11:45 pm You ccould re-grout the side? Where you are coming from is where you are going to... Hi, I have an area of zincalume cladding encasing a number of external downpipes. Unfortunately one of them has been permanently stained by some diluted phosphoric acid -… 0 900 Hi, I am planning to select San Selmo reclaimed original for the fascade of my build. I have seen many photos on line of the brick varying from a rustic to a neat finish.… 0 4568 Building Standards; Getting It Right! Hi, sorry if this is the wrong place - Iām new to the property/building journey (trying to buy my first home) so not sure where/who to go with these sorts of… 0 19120 |