Browse Forums DIY, Home Maintenance & Repair 1 Apr 16, 2024 11:03 am Re: Brick work cracks 2Apr 16, 2024 6:06 pm could be the footing or being hard up against the other wall with no expansion joint or both. You could try again with brick mesh and use some sticky back foam against the wall to leave 10mm expansion. The bricklaying itself looks spot on Re: Brick work cracks 3Jul 04, 2024 8:21 pm Pulse could be the footing or being hard up against the other wall with no expansion joint or both. You could try again with brick mesh and use some sticky back foam against the wall to leave 10mm expansion. The bricklaying itself looks spot on Did you mean brick mesh as in reinforcement? What was sticky back foam? Cheers Do I need to concern about this pattern of crack? Is this crack showing some signs of bigger problems? Thanks for any suggestions! 1 9714 The CSIRO BTF18 explains differnt types of cracks and what "normal" is Google this and the top result is actually the latest version. You normally have to buy this from… 9 21113 The mesh is often stuck on wall first then rendered over, which means it does nothing Not to specifications Get a scope of works in writing before start, needs to be… 10 24131 |