Browse Forums DIY, Home Maintenance & Repair 1 Mar 29, 2022 5:03 pm Hello everyone, I have an old house (1914ish) and we are renovating the kitchen. We want to expose the bricks on the walls. My problem is, there is still alot of mortar and dust coming out of the brick. I will wire brush clean this as much as possible. See pic below Like ⋅ Add a comment ⋅ Pin to Ideaboard ⋅ What does everyone recommend in terms of product to protect the bricks, contain the brick/mortar dust from future wear and seal? Thanks for your answer in advance. Regards, Phil Have look at your house plans and you will probably find that brick articulation joint has been missed. Maximum allowable spacing is 6M or 5.5M for a wall with window… 17 20623 the leaves that are now underground go yellow, the tips that poke through photosynthesise and have chlorophyll, same reason they grow rhubarb in the dark. 5 4895 Building Standards; Getting It Right! Hi all, My neighbour has built his 15m long garage on our boundary. It was agreed as part of the planning permit that the wall must be in exposed recycled brick. For some… 0 10920 |