Browse Forums DIY, Home Maintenance & Repair 1 Jul 04, 2017 5:10 pm Hi there, we're thinking about prepping these treated cypress posts (100mm x 100m x 3m) and varnishing them. they're pretty rough. should I be planing them or sanding them with a belt sander before applying the varnish? we will be adding thermoclear polycarbonate sheeting for the roof. If we wanted to get fancy and do it to the pergola roof structure too, use the same approach? we may just paint them grey if it looks like too much work (i.e. more than 5 days to prep/stand/varnish). thanks here's a few pics of the posts and roof https://ibb.co/i7T10F https://ibb.co/k3uPLF i think option 2 is much better with easy access to the garden without having to walk through the new sunroom which makes it a better room for guests and TV .a simple… 2 9302 There may be answers here but can't find anything. I have a closed in veranda, four windows. North facing, just had sunblock blinds installed. A bit cooler (actually… 0 3950 Hello, I am looking to install a fence but I tried to dig the holes with a post digger I realised the sand is very runny. Very, very runny. It just slides off the sides… 0 13581 |