Browse Forums Outdoor Living 1 Feb 11, 2020 6:48 pm Hi, Im looking at getting some plans made up for a 16m Wide x 46m Long x 4m Eve Hieght Shed with a 15 Degree roof pitch. Ive priced up a few kits but they all use C Channel etc, I prefer to use RHS, I have the skills to erect the Shed my self, my issue is I need to calculate the size of the RHS for the Columns and Rafters so I can quote my materials up to compare it with the Kit Sheds... Do we have anyone on here with engineering knowledge who can lead me in the right direction or possibly pass on some reading informations? Regards Is it possible to render an old corrugated iron shed.I have heard that it can be done if it is covered with chicken wire first.Not sure of the ratio of the render mix and… 0 3361 Thanks. Yeh ideally that would have been good, but have progressed too far now. Hoping some well placed internal walls fixed up into the battens will provide some… 2 3468 Hi, I am sheeting the inside of a 5.7 x 8m shed with gyprock. Unfortunately the shed wasn't designed for internal cladding but I have been framing it up as strongly as… 0 2648 |