Feb 22, 2018 7:56 am
Not sure if this is the best spot, but ...
I'm always having trouble with our sandstone pavers around the outside of our pool - ie the deck area. We have a sandy base/soil around us with this black ingredient. In wind the sandstone seems to suck it up.
I'm constantly cleaning it - gurney etc. I'd like something that is easy to wash off - with a hose perhaps.
Does anyone have a solution - no pun intended.
I've even thought of painting over them - if I could find the right paint/cover.
Re: Pool Surrounds - Pavers - Update etc5
Feb 25, 2018 9:59 am
I just had this awesome thought - I could gurney the pavers and then seal them myself !
I have a gurney - a real gurney ...
I guess Bunnings would have the sealant.
Should I also lacquer the top though - would it be needed ?
Re: Pool Surrounds - Pavers - Update etc7
Mar 17, 2018 11:47 am
Not sure anyone read this, but ...
I ended up getting a local company to deep clean the sandstone pavers - quite powerful gurney and some chemical stuff. Really brought them back to a good look. Their machine left my electric gurney for dead. Even on a low setting. They were worried they might "hurt" the stone.
Then I did the seal. Bought the Crommelin from Bunnings - too much as it happened (hope I can return one tin) - and spread it on fairly liberally. As it'd been raining for weeks I had to wait for the right time. AND - I needed 24 hours of sun to make sure it dried properly. Probably need 24 hours either side of the application. It does do about 3 sq mts a litre.
Well - the day came - the rain had stopped and I gave it all a clean to get little bits of crap off. This dried pretty well and put on first coat. Then about an hour later the second - again fairly liberally. The stone gobbled it up. Second coat was taken in a bit slower.
Pavers look awesome now. Almost like new - if I can remember back to then. I did spill some water on this morning and it "pooled" like on a car wax. It says its not water proof but clearly does repel. I hope it does make it easier to keep them clean now. I'll do a good wash off at least every month now - or sooner - depending on the weather.
(I thought I'd stuffed it at the start - when I opened the tub it was a milky white substance - I thought it would be clear for some reason. When applied it sat on the surface like milk for a few minutes - but very quickly disappeared. Second coat went on much easier.)
Happy to answer questions if anyone is looking at this.
Sign in or Join to reply to this Topic
strSeal concrete for jarrah floorboardsSeal concrete for jarrah floorboards
Hi What do you recommend for sealing concrete for new jarrah floorboards. Polyethylene sheet or liquid sealer which dries upon application. If latter, which brand.
lobeexxConcrete floor - Seal or put tile?Concrete floor - Seal or put tile?
We have concrete floor in our house, we don't have a lot of budget so we were just planning on leaving it with the concrete look, like those contemporary houses. I've…