Hi,
Really struggling to find some consistency amongst Span Tables, can anyone help @StructuralBIMGuy?
I'm building a low deck that is 10.5x7m using Single Span Joists 140/45 @ 450 and Continues Bearers 2x140/45
I'm getting mixed feedback RE: Span Tables
Using the below I concluded to Bearer Spacing @ 2700 and Joist @ 2100
https://wilsontimbers.com/features/seas ... pan-tables
However, because of the following tables I'm unsure
https://carrollswholesale.com.au/magna- ... k-bearers/
http://www.5startimbers.com.au/download ... Design.pdf
https://www.davidstimber.com.au/resourc ... an-tables/
Any guidance? or some direction which table to stick with.
Thank you,
WatchingStarredHistory
MembersPros
Browse Forums Outdoor Living In general, a member continuous span means it’s continuous (one whole piece of timber/steel or any material) over at least three supports (two spans). Single span means… 1 7067 So, how is the comparison between the two ( Alpha and Hebel ). Do you still put the yellow/red tounge over the alpha also or it's not required and their noise reduction… 16 7712 Hi, as per the subject. Does anyone have any recommendations for the best value decking oil (Bunning is close to where I live) for a treated pine deck? Thanks 0 22918  |
