Browse Forums Outdoor Living 1 Jun 24, 2015 11:51 am HI, I am after some advice and guidance on how to build a timber framed corrugated fence. I am wanting to use large posts such as 150 x 150 or 200 x 200, and have a mini orb or similar metal panel in the middle. With the ribs though, i want them running horizontally, and i dont want to have a rail in the middle if possible. I have seen the pre-made fence panels, but the ribs all run vertically. Is there way that I can make this type of fence without a middle rail? The fence only needs to be around 1.6m high as well. I considered using a middle rail, but putting the corrugated sheets on either side, but thought this might seem a bit wasteful. any advice would be greatly appreciated. Thanks 1 1127 Hey everyone Not for me or anyone I know, just generally interested. For a single allotment house, are you allowed to take the fence on both sides of your house and… 0 21588 Engineering timber is certainly a less fuss option, times cheaper to supply and install and better withstands humidity. 1 16760 |