Browse Forums Kitchen Corner 1 May 18, 2019 12:15 pm Well I've done it ! After 10 years of carefully placing my feet, I've snapped off the lever on our kitchen vacpan. Consequently, there is little to no suction in the system & can't vacuum the rest of the house. How the hell do we replace it ? After googling, I can't find the repair kit here. Only available in the US. Like ⋅ Add a comment ⋅ Pin to Ideaboard ⋅ Bigger problem is how ot get the whole vacpan unit out in the fist place.............anyone out there had this problem and was able to resolve it without resorting to calling a repairer &/or ripping out the kickboard? Built the Eden Brae Cambridge 34 Family with Boston Corner Facade Re: HELP !! broken vacpan 2May 30, 2019 5:24 pm Just buy new unit & replace or pull required parts off that? $43.50 delivered https://valet.com.au/products/product/vac-355 There is a few installation videos online like this https://www.youtube.com/watch?v=20WEX0UAWv4 I have an investment property and tenants moved out recently. However the Property manager noticed one of the floor tiles is broken and the kitchen Island countertop is… 0 418 That drawingโs in the old units. The sewer tie is 1.44m deep and 4.5m offset from left boundary however the levels were taken ages ago so the surface level will have… 1 3541 Hi there, long-time lurker but first time posting. I've bought a house 2 and a bit years ago and last year we had some major water damage on a converted pergola area… 0 5752 |