Browse Forums Kitchen Corner 1 Oct 30, 2014 7:05 pm We are seriously considering Caesarstone Calacutta Nuvo for our kitchen island and are thinking of using Dulux Natural White for the polyurethane cupboard doors in the satin finish. The walls will be in Natural White too. What do you think of this combination? Have you used Calacatta Nuvo in your kitchen? If you could post some pictures we'd appreciate it! Our Phoenix Build: http://ourphoenixbuild.wordpress.com/ Re: Polyurethane colour to go with Caesarstone Calacutta Nuv 2Oct 31, 2014 7:52 am You definitely can't go wrong with white on white for Calacatta Nuvo. If you want to be a bit more adventurous it also works rather well with black too. Our online Visualiser is a great way to compare colour schemes if you're unsure. http://www.caesarstone.com.au/visualiser Normally you use builders bog. Polyurethane painting is basically the same principle as car panel beating and painting. All the prep work is the same and so is the… 3 3067 Thankyou so much 😀 I've decided on White on white for doors and trims, White on white 50% on ceiling and Mt buller for walls. Fingers crossed it will look OK 😀 2 7158 Hi - thanks for your reply. Yes I think 'Ill go for whitish with very speckly bits rather than pure white something like this. PS was actually 2008 I built the… 2 11696 |