Browse Forums Kitchen Corner Re: Do Handle-less Drawers Sit Flush as Standard? 21Aug 19, 2014 6:13 am Cutting Edge Kitchens and Cabinet Making http://cuttingedgekitchens.net.au http://www.facebook.com/pages/Cutting-Edge-Kitchens/290484196676 Mobile : 0419 430 575 PH: 9452 4772 Fax :9452 4772 cuttingedgekitchens@outlook.com Re: Do Handle-less Drawers Sit Flush as Standard? 24Aug 19, 2014 4:47 pm Quality is like buying oats. If you want good,fresh oats,you'll pay a fair price. However,if you can be satisfied with the oats that have already been through the horse, that comes a little cheaper. Re: Do Handle-less Drawers Sit Flush as Standard? 25Aug 20, 2014 7:09 am Sonny2014 If you look at the attached image I believe this is what has happened, it's a combination of: Cabinetmaker having not checked appliances, Installer who cut templates not thinking & stonemason who accepted the templates as is. This is a huge issue as most appliances wont fit. Like ⋅ Add a comment ⋅ Pin to Ideaboard ⋅ Yep, that is a possibility. Looks like no one has paid any attention to the appliance specs or understands you need to build things slightly differently with handless. Cutting Edge Kitchens and Cabinet Making http://cuttingedgekitchens.net.au http://www.facebook.com/pages/Cutting-Edge-Kitchens/290484196676 Mobile : 0419 430 575 PH: 9452 4772 Fax :9452 4772 cuttingedgekitchens@outlook.com The unit normally clips into a metal plate screwed to the wall, either plate is not flush, or unit not hooked in and could be hanging from the pipes partly, either might… 2 15800 Okay, then the choice is really about the build quality of the door itself which means the brand name. Sorry I can't recommend one or the other so best to rely on comments… 5 3277 Hi there, looking to have a gym in a new build. Planning to install some sort of rubber mat flooring (on concrete) i.e. Asking the builder to not do floorboards in the gym… 0 1319 |