Browse Forums Kitchen Corner 1 Sep 25, 2013 2:04 pm Hi, we are thinking of mounting a 12mm plywood panel at the back and 4mm glass at the front for a splashback. The plywood will have some kind of design/print pattern attached to it. The whole panel shall be framed with an alu profile consisting of a back piece that gets fixed to the wall and the front bit gets clipped on like so or similar Like ⋅ Add a comment ⋅ Pin to Ideaboard ⋅ Like ⋅ Add a comment ⋅ Pin to Ideaboard ⋅ Where would I be able to get it from, store or online? I'm in Perth. Thanks DIY, Home Maintenance & Repair If the railhead is so poorly fixed it is also likely that the railhead is also non compliant, what about overflows and sealing railhead to the gutters?. 3 5977 Need to remove glass panel out of concrete without wrecking the glass to get the spa room in, any recommendations on how to do that. Thank you 0 39049 |