After some advice before we meet our SS tomorrow morning so that we know where we stand. I have just measured up our kitchen cabinets and it seems that our 3000mm long section of cupboards is 35mm short. This was initially longer but we had to shorten it to 3000mm as we didn't want a join in the stone benchtop. So not happy with a loss of 35mm.
The island bench is approx 20mm too far over to the right of the plans which means it wont line up with the bulkhead above it or the wall which it is accross from (This is the wall that just randomly pokes up from the bottom of the plan, we are adding a laminate pantry door later to line up with the cabinets). It also wont line up on the other end with the cabinets against the wall but currently looks fine because those cabinets are 35mm too short...
Does anyone know the tolerance for these?
Also a random question, is the gas connection point for an oven supposed to be behind the oven or in the cupboard next to it? Noticed ours is in the cupboard next to it which is rather inconvenient for what we planned in there but it isn't on the plans.
Thanks for any help!
http://i1066.photobucket.com/albums/u403/xxkat86xx/kitchenplans_zps89a78240.jpg
http://i1066.photobucket.com/albums/u403/xxkat86xx/kbh1_zpsc80fadaf.jpg
Haven't got any decent pics of the cabinets in place