Browse Forums Kitchen Corner 1 Jul 06, 2013 12:06 pm Hi all, Looking at updating an existing tassie oak kitchen and wonder has anyone done similar and has images/pics or seen any sumilar on weeb they can point me too. Current kitchen in good structural condition plan to: ~ replace wall oven F& P double ~ Replace cooktop with F& P smart cook surface (narrow) ~ Replace laminate (timber edged) bench tops with Caesarstone tops in S@@@ mushroom colour Why,, need face lift and appliance yet like timber kitchen lok and feel and want to keep with other color schemes and $$ this will costs approx $4.5k for appliance and $2.5k for tops new kitchen $15k + +appliances, + + Thoughts... ..also I see some good responses from " Cutting Edge Kitchens and Cabinet Making" has anyone used these people? Re: Updating a Tassie Oak Kitchen with Caesrstone bench tops 2Jul 08, 2013 7:13 am Don't forget to allow for plumbing and electrical. You might also have to replace the splashback depending on how well the old bench top comes out and the thickness of the new one. Cutting Edge Kitchens and Cabinet Making http://cuttingedgekitchens.net.au http://www.facebook.com/pages/Cutting-Edge-Kitchens/290484196676 Mobile : 0419 430 575 PH: 9452 4772 Fax :9452 4772 cuttingedgekitchens@outlook.com Re: Updating a Tassie Oak Kitchen with Caesrstone bench tops 3Jul 08, 2013 9:51 pm Have a look at Granite Transformations for your bench tops. They use your existing laminate and I think basically put a stone veneer on top. More economical than a full stone bench tops and looks just as good. I have heard very good reports of their work( from the Perth branch - not sure of their reputation in other states) Re: Updating a Tassie Oak Kitchen with Caesrstone bench tops 4Jul 09, 2013 6:55 am judydg Have a look at Granite Transformations for your bench tops. They use your existing laminate and I think basically put a stone veneer on top. More economical than a full stone bench tops and looks just as good. I have heard very good reports of their work( from the Perth branch - not sure of their reputation in other states) I would do a search on this forum regarding both of the above points before going to much further. Do your research. Cutting Edge Kitchens and Cabinet Making http://cuttingedgekitchens.net.au http://www.facebook.com/pages/Cutting-Edge-Kitchens/290484196676 Mobile : 0419 430 575 PH: 9452 4772 Fax :9452 4772 cuttingedgekitchens@outlook.com Hi - thanks for your reply. Yes I think 'Ill go for whitish with very speckly bits rather than pure white something like this. PS was actually 2008 I built the… 2 11694 Building Standards; Getting It Right! These can be easily filled and repaired and it doesn't cost them much to do. Id get the builder to do this first and if the repair is not suitable then a replacement is… 12 31266 Thanks Ardo, they are sort of semi concealed. I think it is only a few millimetres. I see if they can adjust the hinges. 4 3798 |