Browse Forums Kitchen Corner 1 Jan 04, 2013 10:24 am Hi all We are building a custom design home home with Busby and will have polytec benchtops and cupboards. http://www.polytec.com.au/index Colours Overhead cupboards Malt - Gloss Lower cupboards Truffle Lini - Gloss Bench top Caraway - Matt I am looking to change the kitchen benchtop from tight form to square edge - http://www.lifetime.net.au/benchtops.htm Has anyone done this and are they happy with the way it looks? Would love to see pictures of other polytec kitchens and opinions Re: Show me your polytec kitchens 2Jan 04, 2013 3:28 pm knockdownvic I am looking to change the kitchen benchtop from tight form to square edge - http://www.lifetime.net.au/benchtops.htm Has anyone done this and are they happy with the way it looks? Dont do it!!!!!! Its a laminate top and the edges when sharp are very brittle. The tightform radius is very small bad adds alot of strength to the top and bottom edges. The laminete is one piece on the top and then rolled around and down the edge. Square edge use one piece on the top and a seperate piece for the edge. It leaves a very square sharp edge which can easily be damaged and chipped. Cutting Edge Kitchens and Cabinet Making http://cuttingedgekitchens.net.au http://www.facebook.com/pages/Cutting-Edge-Kitchens/290484196676 Mobile : 0419 430 575 PH: 9452 4772 Fax :9452 4772 cuttingedgekitchens@outlook.com Interested in getting either the Polytec Boston Oak or Palace Peak for kitchen cabinets. Looking at the Boston Oak ones, it appears that the colour varies significantly… 0 1791 Hi , I'm currently going through this now within the Whitehorse council which has a similar set of restrictions. We're having to make compromises with our floor plan due… 3 23604 Thanks mate. Yeah good points! Leaning towards Option 3 to get a bit extra space in the cabinets but not going too crazy high (and expensive). Would require a mini… 13 30503 |