I used to be indecisive but now I'm not so sure

Browse Forums Kitchen Corner Re: What side is your drainer on? 22Apr 12, 2008 5:12 pm ![]() Kiwi, your kitchen layout is identical to ours in terms of fridge, pantry, cooktop, breakfast bar, sink postions etc. Your kitchen looks really nice. interesting you have used the rounded bench top edges, we are doing this too, although I notice the square edges seem much more common now. May I ask the dimensions of your kitchen? Judging by the cupboard lenghts, it looks similar to ours, which will be 4m x 2.7m. Thanks Helyn! The dimensions would be very similar, I guess your talking about the bench dimensions? Our place is just over two years old now, just goes to show the changing trends. Re: What side is your drainer on? 24Apr 12, 2008 7:41 pm Kiwi, on our floor plan it shows the dimensions as 4m x 2.7m, I presume this is measuring the floor area taken up from the outside of the bench widthwise and the length up to the arch length wise.
have posted plan so you can see our kitchen in relation to rest of house. And Ash, not sure what your measuring in dimensions of metres!! (or do you really mean it is too personal about kiwi's house ?? ![]() http://i272.photobucket.com/albums/jj187/nurselovescoffee/IMG_0001.jpg Re: What side is your drainer on? 27Apr 13, 2008 9:12 am ![]() Kiwi, on our floor plan it shows the dimensions as 4m x 2.7m, I presume this is measuring the floor area taken up from the outside of the bench widthwise and the length up to the arch length wise. have posted plan so you can see our kitchen in relation to rest of house. Hi Helyn, very nice house! You're going to love the kitchen, light and airy, and no thoroughfare. ![]() Without scaling and measuring the plan, I’m guessing the measurements are the total area covered for the kitchen area from the outsides of the bench top. Hey guys Just wanted to see if anyone may be able to help with this. Large shed lean to. The plan is to fill in the corner with sheeting to protect one side from… 0 1551 Building Standards; Getting It Right! Hi all, wondering if anybody knows the rational behind being allowed to build on the side boundary, 200mm off and then a jump to 1/1.2mtr for a single story. I know… 0 2058 ![]() That's not how planning typically applies. The neighbours setbacks including what windows they may have is based on the boundary line regardless of what you do. If your… 6 2363 ![]() |