Browse Forums Kitchen Corner Re: Installing glass splash back behind rangehood 5Sep 03, 2010 1:43 pm frozensage Whoever hangs the rangehood needs to make sure they allow for the thickness of the glass going behind it if they cut any holes in the ceiling for ducting before the glass is up. are there a standard thickness of glasses? 8mm for example? Re: Installing glass splash back behind rangehood 6Sep 03, 2010 9:50 pm frozensage frozensage Whoever hangs the rangehood needs to make sure they allow for the thickness of the glass going behind it if they cut any holes in the ceiling for ducting before the glass is up. are there a standard thickness of glasses? 8mm for example? Depends on the requested order and the type of glass splashback you have ordered Re: Installing glass splash back behind rangehood 7Sep 04, 2010 6:00 pm Bam Your cabinet maker wont install the rangehood (not that type anyway), your electrician should So once the cabinets are in, in comes your splashback, and then your electrician/plumber Depends upon the range hood. If it is hardwired then sure the sparkie needs to do it, if plug in then anyone can do it. My range hood is a large feature one, as opposed to the small under cabinet type and it is a plug in jobie. The power point is behind the duct cover. Our Bondi Greenwall was impressive from day one with advanced lush plants to provide a wow factor to this recently renovated living area. The boundary was less than 1… 0 17490 Old Home Restoration / Renovation Hi, just discovered all these junks left behind under the floor. Could any of these be asbestos? Best to leave as it is or clean up? Thank you for your thoughts 0 8738 Hi everyone! This is my first time posting here, and I'm looking for some advice regarding my house construction project in North Kellyville. I… 0 6759 |