Browse Forums Kitchen Corner Re: Rust on the outside of an oven 6Aug 11, 2010 5:24 pm Thanks Ed & Grinder. I'll take up your suggestions and then cross my fingers. The way I look at it, we're spending half the money that we were planning to, and the rusty bit is almost certainly going to survive the other parts (given today's manufacturing standards). Phew. I will cross oven off my shopping list. e. You’re on the right track, wire brush in a grinder then a zinc rich epoxy primer then a top coat of some sort, like a waterproofing membrane. Raising the concrete would… 1 6980 Very common on rendered homes Smaller suppliers get the lower quality raw materials 6 11803 THanks , l got a licensed building inspector to look at the rust, he said its just surface rust and it would take many years to become a problem because the beams are so… 22 28006 |