Browse Forums Kitchen Corner Re: Thickness of 2 pak doors - 18mm or 25mm? 13Apr 04, 2010 8:30 am arms borg to stop two pack doors from bowing is is best to use board that has laminte on both sides. With the face to be roughly sanded for the two pack to stick. not sure whether you are taking the mickey out of us ,but when you are to use two pack paint most boards are mdf coated on both sides with a MELAMINE coating to fully seal the board ,if you are not taking the mickey ,now you know how this industry works Sorry your absolutly right. The correct name is melamine. Some cabinet makers use board that only have melimine of one side which can cause the doors to bow. in regards to two pack I find it best to use boards that have melamine on both side for the reasons you have described above. we have a standard size and often we have a lot of variety to choose 0 3575 We are looking for sliding doors which are 5 metres tall. There are a few European options. Any manufacturers in Australia or distributors? 0 5039 Pls help! The black marks show where our outdoor entertaining area would be along side of house as we have an irregular backyard and want to make use of the side as… 0 4353 |