Browse Forums Kitchen Corner Re: Colour confusion 4Jan 04, 2010 1:59 pm Ms Builder Burnished wood (Laminex) would also be really nice. I love this colour. If we arent having a two pac kitchen, this is the laminex I would use for underneath cupboards for sure. We are going glass cabinets above (obscured). You could maybe do all bottom cupboards and the wall oven tower in burnished wood, then white for the rest. We are thinking of having a metallic silver splashback. If we dont have laminex will we still be having a dark grey'ish coloured colour. I dont know what the other colours you are looking at are, but if you are wanting a lighter colour for maybe the wall oven tower, what about laminex new graphite? P.S. you really need to see these colours in real life rather than on the laminex site, the new graphite looks so much better in real life! The new graphite sounds like a colour I would definitely like, hopefully going to look at some samples soon. I was also thinking of a metallic silver splashback, just went to tile shop and had a look at some cool tiles! I'll definitely check out the burnished wood, thanks Kim Hi All, see above image. The required setback from the rear boundary in my case is 5m, as you can see the shape of the site and location of the boundary is slightly… 0 8454 Thankyou so much 😀 I've decided on White on white for doors and trims, White on white 50% on ceiling and Mt buller for walls. Fingers crossed it will look OK 😀 2 7165 Hi - thanks for your reply. Yes I think 'Ill go for whitish with very speckly bits rather than pure white something like this. PS was actually 2008 I built the… 2 11696 |