Browse Forums Kitchen Corner Re: Ceaserstone v Solid Surface 5Nov 25, 2009 7:35 pm If you need a kitchen drawn up, post it on this thread - gotta give me a couple of days though:) viewtopic.php?f=16&t=26892 Re: Ceaserstone v Solid Surface 6Nov 25, 2009 8:28 pm Where you are coming from is where you are going to... Re: Ceaserstone v Solid Surface 7Nov 25, 2009 8:57 pm If you need a kitchen drawn up, post it on this thread - gotta give me a couple of days though:) viewtopic.php?f=16&t=26892 Re: Ceaserstone v Solid Surface 9Nov 26, 2009 9:55 am If you need a kitchen drawn up, post it on this thread - gotta give me a couple of days though:) viewtopic.php?f=16&t=26892 Re: Ceaserstone v Solid Surface 10May 09, 2024 10:34 am ![]() Dont get arcrylic. It scratches easily and it wont be long before it starts to look dull and cheap. Products such as Corian have been around a lot longer than engineered Stone. No stone supplier will give you a written guarantee that their product will not fade or stain. These properties that belong to Corian and like products accompany a Counter Top that is infinitely repairable and resurfaceable. You can wash over existing pavers with 10% solution of water and hydrochloric acid, then wash off. The acid will provide for required bond key with new concrete. 1 38534 ![]() In kitchen design, want to run the full recessed LED channel under overhead cabin including the undermount rangehood (BOASH Series8 - 282mm deep). cabinet guy said the… 0 319 If this is a custom build then I would expect the builder to set out the door frame closer to the wall to avoid the gap between architrave and the wall and or specify… 9 10150 ![]() |