Browse Forums Kitchen Corner 1 Apr 06, 2009 10:15 am Hi All Looking at upgrading our kitchen to have a glass splash back. We like the white without green tinge to it. So we will be looking at the starfire glass painted white. The size is approx 2550mm x 650mm. Can anyone advise a rough price. Will need 2 power point cut outs at either end. Thanks Built The Huntley 290 with HomeXcellance / Cheviot Homes Re: Glass Splash back Price 2Apr 08, 2009 10:51 am you will pay anywhere from: $500-$800 a m2 for white on starfire $50-$200 per cut out So in your case it would be: 2550x650= 1.65m2 @ $500 p/m2 = $825 > 2550x650= 1.65m2 @ $800 p/m2 = $1320 Cuts $100-$400 Installtion/Delivery: $350-$500 (Generally includes a prelimeanary site measure) Hope that helps Regards Ben Our Bondi Greenwall was impressive from day one with advanced lush plants to provide a wow factor to this recently renovated living area. The boundary was less than 1… 0 15303 My land is 260m2 (10m x 26m) located in claymore NSW. Under campbelltown council. I know in general the following setbacks would apply ground floor side setback =… 0 6919 Good luck with it. I don't know what the cost of a nice bidet seat with a 25mm air gap will be but you are obviously deducting the cost of a RPZ valve and its… 9 6983 |