Browse Forums Kitchen Corner Re: Frame for single oven 2Sep 01, 2020 2:12 pm Accessible Carpentry & Cabinets accessiblecarpentry@gmail.com accessiblecarpentry.com.au https://www.facebook.com/pages/Accessible-Carpentry-Cabinets/583314911709039 Re: Frame for single oven 3Sep 01, 2020 2:23 pm chippy I'm trying to work out exactly what you are trying to achieve. If I'm reading correctly, you have a 60mm gap each side and then space above that you want to use as a shelf. First thing, I wouldn't be using pine and ply. It will look ugly and need painting. You could easily use melamine board that will look clean and be easy to clean. That's right. Right now, it looks like this and the oven is too small to be mounted: Like ⋅ Add a comment ⋅ Pin to Ideaboard ⋅ I just thought I'd use pine for the frame that holds the oven in place and the shelf on top. To cover the gaps, I was thinking of gluing aluminium strips onto the face. If not pine, what might be a good alternative? This is 100% true. You can not hang anything on steel frames. very frustrating 8 8083 Hello All 🙂 We are planning to start our journey of construction our first home. We zeroed down on Metricon and henley homes based on design suitable for our lot and… 0 8767 Hi Chippy, no there isn't, gave it a really good look through and literally opened everything and checked all edges as well. Hence the question, just hoping someone would… 2 2122 |