Browse Forums Finishing Touch 1 Nov 21, 2018 2:43 pm Hi Guys, I painted a feature wall in my house with Dulux Concrete Effect and was quite happy with the result. I then sealed it with Bergers Jet Dry Stone and Paving Sealer in natural finish and it looks horrible. The sealer bubbled up and left a crappy glossy finish over the surface - not what I wanted or was expecting. So I now want to strip it back to re-do. What grit sandpaper should I use to sand back the sealer? Re: sanding back interior wall to repaint 2Dec 05, 2019 10:29 pm I would use a white Norton No Fil P180 Grit, this should get you what you want. Your house roof does not show rusting other than some surface rust on the flashings. In my opinion you dont need to replace or paint the roof other than treat surface rust… 1 10206 I am looking for someone who might have tackled a similar issue as me. I have a few rendered interior walls, the surface condition is hardly flat. I can see all the bumps… 0 7964 Hi Would love some advice on a DIY project I've dived into that's now keeping me up at night. We've got a cool 1970's Mid Century style house here in NZ and have always… 0 3995 |