Browse Forums Finishing Touch 1 Nov 25, 2013 10:48 am Hi guys, Got my keys last Friday and started the process of applying Dulux Sealer Binder on Saturday afternoon. After thoroughly stirring the pot, I proceed to pour it out into the tray and then use a roller to apply onto the wall. My initial 10-20 rolls seems to bubble quite severely, as it looks like it is leaving air particles on the wall. Gradually this effect goes away the by the 20th roll I apply using my roller. Now some parts of my wall have dried leaving lumps onto the wall which I'll have to sand down really deeply. My question is...is this normal? I know I need to sand it down but if I can avoid doing a massive sanding job that'd be great. Any advise appreciated. Build #2 Builder: In-Vogue Design: Custom 2 Storey Build #1 Builder: New Generation Homes Design: The Monterey My Build Thread: viewtopic.php?f=31&t=60453 Re: Dulux Sealer Binder Bubbling..!?!? HELP PLEASE! 2Nov 26, 2013 1:11 pm Build #2 Builder: In-Vogue Design: Custom 2 Storey Build #1 Builder: New Generation Homes Design: The Monterey My Build Thread: viewtopic.php?f=31&t=60453 DIY, Home Maintenance & Repair Grind texture and paint off at blister up to top of fence Will see damp cement render 5 6274 Hi Alex, Thanks for the reply again. I had a chat with the builder, he said he will use primer, then hydrotec which comes with colour and sealer as well. A Renderer I… 12 18097 Thankyou so much 😀 I've decided on White on white for doors and trims, White on white 50% on ceiling and Mt buller for walls. Fingers crossed it will look OK 😀 2 7170 |