Browse Forums Finishing Touch Re: black feature walls.... 3May 31, 2012 8:28 pm Internal and External Building and Colour Consultant Online - Worldwide http://www.denovoconcepts.com Re: black feature walls.... 7Jun 02, 2012 4:03 am Hi Yes you have made life hard but it can be done What you are propably seeing is un even roller application and that is probably on the wall that you get undiffused light on If you roll down to apply your paint then cross hatch at 45% and then roll up I think you will find it will be OK We sometimes have the same issues with dark colours on high rise buildings when the client has specified dark colours Best regards Peter Hayes E:peter@peterhayes.com.au The warning is on the sticker on the door too. Second the aluminium powdercoat 6 18204 Thankyou for your advice. We do have Caesar coming out and hopefully resolve the issue for us. 4 18757 I asked this question of one of the forum's resident cabinet makers who may/may not wish to identify himself to answer other questions if he sees this, but the rersponse… 3 7731 |