Browse Forums Finishing Touch 1 Oct 28, 2011 1:05 pm We are trying to closely match taubmans bears foot for a powdercoated bit of aluminium....bears foot is not actually available in a powdercoat, so.... Looking at all the dulux colourbond, duralloy and other standard powdercoat colours....and confused which one/ones might be close...pottery looks a bit pink, paperbark too light, riversand looks close? .... Anyone got any other suggestions to look at? Thanks Re: Powdercoat colour match 2Oct 28, 2011 1:26 pm Can't help with colours but have you contacted a powder-coater direct to enquire about a custom colour? A few years ago I wanted some bedside lamps powder-coated in a non-standard colour I had some paint in that colour so they could get the mixing formula and they said it wasn't a problem because they could mix any colour I wanted. Might be worth a phone call or three to check? Thankyou so much 😀 I've decided on White on white for doors and trims, White on white 50% on ceiling and Mt buller for walls. Fingers crossed it will look OK 😀 2 7073 Hi - thanks for your reply. Yes I think 'Ill go for whitish with very speckly bits rather than pure white something like this. PS was actually 2008 I built the… 2 11632 Looking for advice on whether this variation in tile colour is acceptable. The large tile on the left was used in my main bathroom renovation 1 year ago. My ensuite… 0 8392 |