Browse Forums Finishing Touch 1 Mar 11, 2010 4:45 pm We're finally getting through painting the house. But we're stuck on what colour to do the facia boards. The walls are Dune and the roof is Ironstone. We thought about doing the facias Ironstone as well, but I thought it might be a bit too same. We could go white, but I'm not so sure it would work. Does anyone have any suggestions??? We're kinda stuck as to what to do! This is how it looks at the moment. Like ⋅ Add a comment ⋅ Pin to Ideaboard ⋅ Cheers, Pete viewtopic.php?f=38&t=8824 Re: What colour facias?? 2Mar 14, 2010 10:46 am I think white would work as it would tie in with your balustrades. I think Ironstone would be too much. Building the Grandview 36 with M$tric0n Plans approved 15/4/2010 Site start date 21/5/2010 Our build thread: viewtopic.php?f=31&t=32825&p=461266#p461266 Re: What colour facias?? 3Mar 14, 2010 11:04 am I would go for ironstone. However, also consider something a little different such as Woodland Grey. You would have to see the combination together. Demolition August 2009, Construction Started September 2009, Completed December 2010 Re: What colour facias?? 5Mar 14, 2010 9:26 pm Peter your house is coming on really nicely, well done! I think white would be nice, but I also think Woodland Grey would be nice as well. Internal and External Building and Colour Consultant Online - Worldwide http://www.denovoconcepts.com Re: What colour facias?? 6Mar 15, 2010 9:10 am I think white... I think the woodland grey might make to dark and have too much grey as Ironstone in corporates grey and blue. And by the looks of your photo your windows are white, so it will go nicely. Just my personal opinion Re: What colour facias?? 7Mar 15, 2010 12:07 pm Thanks for your ideas everyone I think we'll just do it white to start with, and then if that's no good we can experiment with different colours. It needs a white undercoat on it first, so that'll let us see what white will look like. Cheers, Pete viewtopic.php?f=38&t=8824 Thankyou so much 😀 I've decided on White on white for doors and trims, White on white 50% on ceiling and Mt buller for walls. Fingers crossed it will look OK 😀 2 3618 Hi - thanks for your reply. Yes I think 'Ill go for whitish with very speckly bits rather than pure white something like this. PS was actually 2008 I built the… 2 8671 Looking for advice on whether this variation in tile colour is acceptable. The large tile on the left was used in my main bathroom renovation 1 year ago. My ensuite… 0 5983 |