Browse Forums Finishing Touch 1 Dec 12, 2008 5:28 pm Hi everyone, Im quickly trying to find out the size of these shutters... I have to give my builder some sizes and these are the exact size im wanting.
PLEASE HELP Like ⋅ Add a comment ⋅ Pin to Ideaboard ⋅ HOME- is where your story begins! Re: Timber shutter size???? 2Dec 12, 2008 5:33 pm Your builder should know the right size……he’s building the house! Internal and External Building and Colour Consultant Online - Worldwide http://www.denovoconcepts.com Re: Timber shutter size???? 3Dec 12, 2008 6:41 pm hahahah its my dad who is building it and has never done the shutter look so im trying to find out.
Thank you HOME- is where your story begins! Re: Timber shutter size???? 4Dec 12, 2008 6:46 pm He will know then, that he has to take the inside measurements of the smaller windows for the shutters.
It will be on his plans. Internal and External Building and Colour Consultant Online - Worldwide http://www.denovoconcepts.com Re: Timber shutter size???? 5Dec 12, 2008 6:48 pm Or better still, you can take the plans to a window supplier that you are going to use, and they will give you the correct measurements for the windows throughout the whole house. Internal and External Building and Colour Consultant Online - Worldwide http://www.denovoconcepts.com Re: Timber shutter size???? 6Dec 12, 2008 6:56 pm Shutters aren’t cheap, so guestaments are not a good way to go here Internal and External Building and Colour Consultant Online - Worldwide http://www.denovoconcepts.com Re: Timber shutter size???? 8Dec 12, 2008 8:05 pm Internal and External Building and Colour Consultant Online - Worldwide http://www.denovoconcepts.com Re: Timber shutter size???? 9Dec 12, 2008 10:21 pm ok well this is the story... My dad is building the house and on the plan my drafts guy just put in a space for "shutters" no mesurements, just space.
So before the plastering gets done i was going to (by chance) see if someone already knew what the sizes of the shutters in my pic where.... I have seen a couple of people have put these in there homes and are on this site. Sorry just thought it was easier to ask here if there were a set sizing or some info on shutters, before i went chaging around the country side trying to find a shutter size. Also these in the photo are out of a Adenbrook home "off there website" so i also thought someone would have put them in there house like these. HOME- is where your story begins! Re: Timber shutter size???? 10Dec 16, 2008 9:41 pm O.k, a bit of estimating here using the dimension tool in google sketchup (and my extremely basic sketchup skills). I could be way out, so take my advice at your own risk.
See the attached pic. Dining tables are usually about 750mm high. Using that as a reference, the shutters look to be approximately 375 wide by 1200 high. Do you know the height of the ceilings in the pic ? Because it looks like the shutters are about half the height of the ceiling to the floor. Cheers, Justin. Like ⋅ Add a comment ⋅ Pin to Ideaboard ⋅ Building Standards; Getting It Right! Long story short, a toilet room is going to back onto our main bedroom and I want to make it close to soundproof. Im going to build two frames (pretty much a room within a… 0 10214 Engineering timber is certainly a less fuss option, times cheaper to supply and install and better withstands humidity. 1 15908 Dear Members I have to decide the Facade column size. My custom builder standard is 350mm with rendering, but i asked for 470mm plus stone or tiles and yet to get… 0 7496 |