Browse Forums General Discussion Re: Knocking out a non-load bearing wall.. ideas on cost? 7Oct 04, 2008 12:45 am If its a non load bearing wall then expect to pay a carpenter for a days labour to cut out the plaster and the studs, frame the doorway and hang the doors. If your only going to install doors then if done correctly then a plasterer wont be needed and the carpenter can put on the archs and the jobs done.
Although then u need to paint Building Standards; Getting It Right! Long story short, a toilet room is going to back onto our main bedroom and I want to make it close to soundproof. Im going to build two frames (pretty much a room within a… 0 10213 Any structural alteration to your home requires building permit. Before you get it you will have to supply plans with structural assessment, you will also be removing… 2 4116 From a pure legal perspective, if you've signed the variation, it is a very high bar to have it set aside. No-one can give you legal advice on a forum, but you would need… 3 5477 |