Browse Forums General Discussion 1 Jul 17, 2020 5:27 am Okay so I originally had a 1400 gap on side of my house with a side gate so I changed that to 1150 to create a 250mm gap on the other side where the garage is against the fence, but I forgot to wright on the plan 250mm gap but I wrote the 1150mm gap on the other side so if you add it up with measurements it will say 250mm gap Can I just start building or do I need to change my permit and Wright 250mm gap on that garage side even tho it says 1150 on the other and will be that gap once pegged out etc Thanks I don’t think so as the floor area over 300 square meters then it is class 3…. 12 18131 Looking to start the journey of becoming an owner builder in SA. Feeling pretty (overly) confident on the building and construction details, but really struggling to find… 0 8720 You wont need a permit to put in non loading partition but you will need a licensed plumber and a licensed electrician 1 6735 |