Jun 15, 2020 5:53 pm
We've recently taken possession of our new build and are currently living through the maintenance period. We are looking at installing some wireless cameras (to supplement the existing camera blind spots), but the house is largely comprised of exsulite EPS. Now I realise you can't really attach anything heavy to the exsulite, but would something like an Arlo camera be OK to attach? Or would even that be too much?
Canberra knockdown rebuild https://the35thweek.blogspot.com
Re: Attaching a security camera to exsulite wall2
Jun 15, 2020 7:26 pm
That will be no problem. You can get wall mates for poly board from your local hardware and they have different load bearings.
here is a site you can get them from
Registered Building Practitioner
Sign in or Join to reply to this Topic
boxhillSingle story house - security camera systemSingle story house - security camera system
I am thinking of a POE system with 8 cameras for my single storey house. Any idea where best to mount each camera? I think 2 front, 2 rear, 2 on left side of house and 2…
MClarkAttaching a side gate/fence to an EPS foam wallAttaching a side gate/fence to an EPS foam wall
I would be putting a past against the foam wall to hinge the gate off ensuring it is firmly concreted down. You want to avoid any penetration into the foam as this will…
MClarkAttaching Steel Legs To Concrete Table?Attaching Steel Legs To Concrete Table?
If you cast them in I'd suggest welding them to a plate and casting the entire plate in with the threads off that. If you chemset get a spanking new quad tip drill bit…