Re: Cavity sliding doors5
May 25, 2020 11:35 pm
I guess it comes down to the design.
It seems the more modern/cleaner designs either do away with, or have a much smaller removable pelmet.
Maybe the deeper ones help with draughts/sound, provided the bottom of the door seals as well?
Re: Cavity sliding doors6
May 26, 2020 9:15 am
99% of cavity sliders are done that way so that any adjusting can be done by removing those pelmets and using a spanner to adjust the door up or down. The one above sticks out so much because it has been painted a different colour ( unless that is only the prime coat ). Paint it the same as the rest of the architraves etc and it will blend in and not be noticeable.
Sign in or Join to reply to this Topic
AlthomAnyone installed InsulGuard Cavity Shield?Anyone installed InsulGuard Cavity Shield?
Thank you both for your responses. Much appreciated. We didn't end up with anticon either - builder didn't recommend it back then (one of WA's best supposedly????) Looks…
domwildInsulation in cavity-brick wire ties and conduits interfere?Insulation in cavity-brick wire ties and conduits interfere?
The company also says there has to be a 50mm overlap, top sheet over lower, the overlap has to be taped, that is a must and then the co. says it should also be taped…
chippyDoors, doors, doors! Recommendations please for WA!Doors, doors, doors! Recommendations please for WA!
If you need emergency glass repair Brisbane you can contact me. I can help as we provide Glass Repairs on doors, windows and more and other services also. Visit our Home…