Browse Forums General Discussion Re: Storm water bore hole. 2Jun 30, 2019 2:30 pm Councils do what is known as an aquifer storage and recovery. Basically stormwater is cleaned in a reed bed then pumped underground at high pressure. In summer they pump it back for watering parklands and the like. You won't get a license to do that. Bores need approval. Re: Storm water bore hole. 5Jul 05, 2019 11:57 pm There is something called a Soak Well which can be used in certain conditions. They are very popular in WA where they work very well on sandy soils. To find out more see http://anewhouse.com.au/2014/09/soakwells/ The Harder You Try - the Luckier You Get ! Web site http://www.anewhouse.com.au Informative, Amusing, and Opinionated Blog - Over 600 posts on all aspects of building a new house. there should be ss cable so you can pull up bore pump for service 1 1317 Water this close to the slab edge or under the slab can cause slab heave or subsidence and is potentially a serious problem especially on highly reactive clay soils. Over… 6 2991 Hello I am developing 2 side by side units. Wish someone can help me on the following questions 1) Which stage should be the storm water pipe installed during the new… 0 6650 |