Browse Forums General Discussion Re: Paint Standard - Door Edges 6Apr 01, 2019 10:10 pm wagga123 Section 12.02 of the Victorian Building Tolerance guidelines is somewhat broad in regard to irregularities in paint work. Not sure if you are in Victoria. Link: Web results guide to standards and tolerances 2015 - VBA https://www.vba.vic.gov.au › pdf_file Not sure if there is an Australian Standard reference on door construction, but There may well be. AS 2688:2017 (might be the one). Thanks. Got it on sec 8.06: Like ⋅ Add a comment ⋅ Pin to Ideaboard ⋅ What we have done in a few theatres ( including my own) is run 2 layers of 13mm gyprock, but sounds insulation especially for the bass is really tricky as a lot of that… 4 2549 Thankyou so much 😀 I've decided on White on white for doors and trims, White on white 50% on ceiling and Mt buller for walls. Fingers crossed it will look OK 😀 2 7143 Thank you. That is really helpful. Once we get the place done and passed for OC we can upgrade in the future once we get back on our feet and not paying mortgage and rent. 4 5713 |