Hi
One wall in my house deviates from the actual edge on the slab (where it should have been laid) . This is a 9m long wall that deviates almost 3 cm at the maximum.
See the photo. Point A is ok where the wall is laid at the edge of the slab then gradually goes inside the slab leaving 1.5 cm empty slab space on point B and 3 cm on point C. From inside the house its the same but not noticeable AT ALL until you put the measuring tape on the floorboard where the board pieces narrows down from corresponding positions A internal to the house to point B.
The building is 5 months old.
What are my rights to get this fixed/claim a compensation from the builder?
TIA Like ⋅ Add a comment ⋅ Pin to Ideaboard ⋅