As per Australian Standard “AS 4773.2-2010 Masonry in small buildings Part 2: Construction.”
Section 9 Masonry Veneer Walls at part
9.6 “Damp-Proof Courses, Flashing and Weepholes”
9.6.1 “Damp-proof courses”
it is mentioned that
DPC shall comply with Clause 5.6 and shall be
(c) visible at the face of the wall, including after rendering or any other applied coatings.
As I do not see any DPC visible outside at the wall, please advise if it is against the standard for brick veneer house at NSW.