Browse Forums General Discussion 1 Jan 01, 2019 12:19 pm What could be the problem here? and how to fix it? https://vimeo.com/308948502 Like ⋅ Add a comment ⋅ Pin to Ideaboard ⋅ Like ⋅ Add a comment ⋅ Pin to Ideaboard ⋅ Re: Screen Door doesn't get closed fully 2Jan 02, 2019 10:57 am Any feedback here is much appreciated. Re: Screen Door doesn't get closed fully 3Jan 03, 2019 12:18 am Just try backing off the closer. On the end of the closer that attaches to the door is a screw. Try undoing it a quarter turn at a time. The more you undo it the harder the door closes. You don't want the door to slam but it needs to close hard enough to latch. It can be a balancing act to get it right. Accessible Carpentry & Cabinets accessiblecarpentry@gmail.com accessiblecarpentry.com.au https://www.facebook.com/pages/Accessible-Carpentry-Cabinets/583314911709039 There may be answers here but can't find anything. I have a closed in veranda, four windows. North facing, just had sunblock blinds installed. A bit cooler (actually… 0 2977 You have no photo with your post. Best I can say is to remove an A&L flyscreen don't be afraid to distort the frame almost like a trapezium. It doesn't take a lot of… 1 7071 2 4496 |