Re: Screen Door doesn't get closed fully3
Jan 03, 2019 12:18 am
Just try backing off the closer.
On the end of the closer that attaches to the door is a screw. Try undoing it a quarter turn at a time. The more you undo it the harder the door closes. You don't want the door to slam but it needs to close hard enough to latch.
It can be a balancing act to get it right.
Accessible Carpentry & Cabinets
Sign in or Join to reply to this Topic
juzdownunderBasin taps - tap bonnet doesn't reach the countertopBasin taps - tap bonnet doesn't reach the countertop
I've just replaced some lever taps in my bathroom sink...after installing the new ceramic spindles and tightening the lock nut, I went to screw the new tap bonnets…
BroncWallaby roof and fully rendered homestead style house....helWallaby roof and fully rendered homestead style house....hel
I am looking at Winter fog grey or ancient ruin brown
MaliktradeHow to seal gap under main door and door framesHow to seal gap under main door and door frames
I too having same issue , I build with burbank Sunray 2500 and my front door is solid timber door which had too many issues since first day and after few visit Done by…