Re: Screen Door doesn't get closed fully3
Jan 03, 2019 12:18 am
Just try backing off the closer.
On the end of the closer that attaches to the door is a screw. Try undoing it a quarter turn at a time. The more you undo it the harder the door closes. You don't want the door to slam but it needs to close hard enough to latch.
It can be a balancing act to get it right.
Accessible Carpentry & Cabinets
Sign in or Join to reply to this Topic
juzdownunderBasin taps - tap bonnet doesn't reach the countertopBasin taps - tap bonnet doesn't reach the countertop
I've just replaced some lever taps in my bathroom sink...after installing the new ceramic spindles and tightening the lock nut, I went to screw the new tap bonnets…
BroncWallaby roof and fully rendered homestead style house....helWallaby roof and fully rendered homestead style house....hel
I am looking at Winter fog grey or ancient ruin brown
building-expertHow to seal gap under main door and door framesHow to seal gap under main door and door frames
External doors should be fitted with weather seals to keep water out and stop air convection. Properly fitted seals will keep spiders out. Internal doors usually have gap…
SBG14Fully Porcelain Tiles or Glazed Porcelain TilesFully Porcelain Tiles or Glazed Porcelain Tiles
thanks again. Still interested in hearing from anyone who has lived with glazed porcelain tiles recently and the feedback from having it, thanks