Re: Screen Door doesn't get closed fully3
Jan 03, 2019 1:18 am
Just try backing off the closer.
On the end of the closer that attaches to the door is a screw. Try undoing it a quarter turn at a time. The more you undo it the harder the door closes. You don't want the door to slam but it needs to close hard enough to latch.
It can be a balancing act to get it right.
Accessible Carpentry & Cabinets
Sign in or Join to reply to this Topic
juzdownunderBasin taps - tap bonnet doesn't reach the countertopBasin taps - tap bonnet doesn't reach the countertop
I've just replaced some lever taps in my bathroom sink...after installing the new ceramic spindles and tightening the lock nut, I went to screw the new tap bonnets…
lathiat1 layer blind that goes from blockout to sheer to fully open1 layer blind that goes from blockout to sheer to fully open
Something like this could be a potential budget alternative though:
MauromarioHow to seal gap under main door and door framesHow to seal gap under main door and door frames
That's burbanks job not your secondly all external facing doors must be painted with a weather proofing paint like oil basedpaint and all door that are in wet areas must…